Riverpack 600 (0600.000)

The internal filter Comline Riverpack 600 was developed especially for fresh-water aquariums from 200 to 600 litres (52 to 132 USgal.). It is supplied ready-to-mount with storage tank and can be fitted in almost any aquarium.
Riverpack 600 contains the following components:
Mechanical quick-run filter with Turbelle® 1600/2 which removes the dirt from the aquarium water cycle directly by means of efficient filtration.
Osmolator for automatic water level regulation.
Two-zone bio hydro reactor with GRANOVIT fill, biological oxidation and reduction for nitrate degradation. It creates stable water conditions as well as encouraging good plant growth, and what is more the bio dynamics in the aquarium biotope are never in competition.
Like all TUNZE® components, the Comline Riverpack is a modular solution, which can be supplemented with additional bio reactors 3166 or quick-run filters 3166/3167.

The Riverpack 600 in detail:
FILTER ACTION: Comline Filter 3166 combines bottom and surface suction with modern cartridge techniques. The filter cartridge can be rinsed, but five spare cartridges are included.
BIO HYDRO REACTOR: Part of the purified water is removed from the quick-run filter and delivered to in the two-zone bio hydro reactor 3179 with GRANOVIT fill. Thus, nitrogenous wastes, such as ammonia, nitrite and nitrate, are decomposed. Used as a hydroponics reactor, it also relieves the aquarium water of dissolved organic matter, which is especially important when keeping Cichlidae, for example.
FLOW: Turbelle® Powerhead 1600/2 with 1,620l/h (428 USgal./h) integrated in the filter.
WATER LEVEL CONTROL: Osomlator 3155 integrated in the filter plus storage tank 5002.25 with a volume of 27 litres (7 US gal.).
HOLDING DEVICE: The Riverpack can be mounted on vertical (1) / (2) or horizontal (3) glass surfaces. The holding device (4) also included can be used to fit the Riverpack almost invisibly below almost all aquarium frames.
POWER CONSUMPTION: Only 12W per hour, 230V/50Hz (115V/60Hz).
DELIVERY CONDITION: Completely ready for mounting with holding device, storage tank and filter cartridges.
Dimensions: L225 x W135 x H300 mm (L8.8 x W5.3 x H11.8in.).

Filter change in less than a minute.

Surface suction.

Integrated pumps.

Integrated to reactor.

Integrated constant level regulator with optical sensor.

With storage container and metering pump.